Antique Hand Cranked Hammer Drill - Restoration

  Megtekintés 20,345,897

my mechanics

my mechanics

4 hónapja

It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video.
At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:

Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Bendurion
Courtney Maleport
David Barker
Greg Marston
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Bosch
Mellissa Marcus
Mike Schlodder
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
potokslow
Todd Medbury
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Alex Breton
alex latzko
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
Jordan Page
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Marius Costan
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Schultes Thomas
Scott Marshall
Sergei Shvartsman
Svenja Kuckla
The Carlsons
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤

My camera:
Panasonic HC-VX11

If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)

Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
hupost.info/chat/mWJk22-QdpqgfcY/vide
„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics
My Main Channel:
hupost.info
My Second Channel:
hupost.info/tools/4EQCwfH54ieNPswtXh5K0w.html
My Patreon Page:
www.patreon.com/mymechanics
Follow me on Instagram:
my_mechanics
My Facebook Page:
My-mechanics-1966277857002099/

Megjegyzés
KangNo Chanel
KangNo Chanel 2 órája
Hello vidios oke love❤️❤️❤️from Indonesia👍🏾👍🏾👍🏾👍🏾
goober
goober 5 órája
I was like, this looks like a good quality tool....then I saw the British made.... That's why!!!!
Irmgard Luckhardt
Irmgard Luckhardt 16 órája
super!
Вадим Кузнецов
Вадим Кузнецов 21 órája
...если сказать что ты молодец!,- это значит не сказать ни чего!, меня удивляет другое!,-я про механический перфоратор первый раз увидел из твоего ролика, не знал, что бывает такая техника, а после восстановления-,выглядит лучше новой, такой перфоратор можно использовать в тех местах, где отсутствует электроэнергия, здоровья тебе и удачи во всём!!!
Diane Maher
Diane Maher 21 órája
I wish you could work on a piece for. me! It's a typewriter crank.
Анвар Миф
Анвар Миф Napja
Ёптиль моптиль ручной перфоратор =))))) Он существует блин мне бы такой соседей по баловать =)))))))))))))))
Политика завтра
Политика завтра 2 napja
Привет канал 👍
The Lycan
The Lycan 2 napja
That test was very satisfying to watch and hear oml
Jjrjdirir Ijdjrjrjfir
Jjrjdirir Ijdjrjrjfir 2 napja
ش
Kimberley Davis
Kimberley Davis 2 napja
It always amazes me when I watch these videos at how complicated some of these things are period from the outside it looks like 2 or 3 pieces like the gas lamp Yeah looked to be. And then when he takes the cover off it's a million pieces that he knows how to put back together!
Богдан Миров
Богдан Миров 3 napja
В итоге что это такое 🤷‍♂️? Есть тут русскоговорящих 😂
John Lois
John Lois 3 napja
What is this black paint
MIkeneko
MIkeneko 3 napja
I LOVE YOU
Yalmaz Khan
Yalmaz Khan 3 napja
When he applies black colour, it looks like my pc is not rendering the scene on my screen properly
serega mishenko
serega mishenko 3 napja
Мастер! Супер! Пример всем!
Humanities Resistance
Humanities Resistance 4 napja
The privilege you have and skill is uncanny
Juan C Ussa D
Juan C Ussa D 6 napja
He is too good. Master on it! Bravo!
Majedeh Sedeh
Majedeh Sedeh 6 napja
احسنت النشر بالتوفيق استمر
Владимир Пугачёв
Владимир Пугачёв 6 napja
Слов нет. Хотя одно есть. ОХРЕНЕТЬ МОЖНО!!!
Вадим Кузнецов
Вадим Кузнецов 21 órája
...это уже два слова!!!
hisham EF
hisham EF 7 napja
at the beginning, I remember being in the middle of the desert
Respxct_Oni
Respxct_Oni 8 napja
Fortnite players: it’s a harpoon gun
AG 17 OFFICIAL
AG 17 OFFICIAL 8 napja
very professional and I like your content channel👍👍
Carry On
Carry On 8 napja
It’s not really restoring if you are just going to make new parts but the video itself was good
Saren
Saren 9 napja
Your videos are pure eye candy. Even the sandblaster power button.
Bill Randolph
Bill Randolph 9 napja
No person is a better restorer than he.
Gabriela Oliveira
Gabriela Oliveira 9 napja
Mano, coloca uma luva ai vei nmrl
Juicyy
Juicyy 9 napja
mano poe uma luva ae parsa pelo amor de deus
Куба Куба.
Куба Куба. 9 napja
Зачем я это смотрю?
Joshua Carbajal
Joshua Carbajal 9 napja
I love that old things can be fixed because they’re not 95% plastic.
Bridger Barnes
Bridger Barnes 9 napja
Do you do research on all the things you restore or just go with the flow?
Tráng Chứ
Tráng Chứ 9 napja
ua mob nias qau kawg yom
VersuS Angel
VersuS Angel 9 napja
What is the name of the black paint that you put on it? Sorry for my ignorance I'm Latino :c I love these videos
กัญญารัตน์ จันทร์พิมาย
กัญญารัตน์ จันทร์พิมาย 9 napja
... I
กัญญารัตน์ จันทร์พิมาย
กัญญารัตน์ จันทร์พิมาย 9 napja
Lip
SlyTreeRat
SlyTreeRat 9 napja
Literally a surgeon with how well you restore some of these
Logan Edwards
Logan Edwards 10 napja
I'd love to see you do a rifle restoration.
Eliel Milton
Eliel Milton 10 napja
Extreme perfect
humerto diaz
humerto diaz 10 napja
Buenisimo
Aziz Peregrino-Brimah
Aziz Peregrino-Brimah 11 napja
Looks like a 1920's gun you aim and yell out "filthy copper!" LOL
Luis Cummins
Luis Cummins 11 napja
Bro I can watch this all day. I subscribed. Awesome work! Cant imagine how long editing takes!
Manny From Miami
Manny From Miami 11 napja
this needs to be a new CoD weapon
Gary Lang jr
Gary Lang jr 11 napja
This should be titled make new parts for old tool
krumpi123
krumpi123 11 napja
you kinda effed up the angle of the shoulder piece...
Volkan GÜNYELİ
Volkan GÜNYELİ 11 napja
Nice job master 👍👌👏👏🙌🙂
Jay Gray
Jay Gray 11 napja
Dope.
Federico Goetschy
Federico Goetschy 11 napja
Admiro tu "mano de obra" de excelente calidad y prolijidad, así como también la amplia disponibilidad de elementos y herramientas que tienes para desarrollar tus trabajos que los considero rayano a la perfección..! ¡Felicitaciones..!!!! Saludos desde la Republica Argentina..!
URBEX TEAM FAMILY
URBEX TEAM FAMILY 11 napja
c'est toujours très impressionnant! MERCI
Bruce Renoir
Bruce Renoir 11 napja
How is it possible for this video to have 14 000 dislikes ?
Leonardo
Leonardo 12 napja
top
Edsko de Vries
Edsko de Vries 12 napja
One of your best projects for sure. What a masterpiece! Stunning work.
roberto villalobos
roberto villalobos 12 napja
Excelente trabajo 👍 volvió a la vida esa herramienta muy bonita y compleja . Desde Venezuela ciudad Maracaibo
Данил
Данил 12 napja
Классно. Только приклад изначально был вертикально,а в конце установили горизонтально )
Dio Benson
Dio Benson 12 napja
I wish that I can buy the hammer drill
Леон Лофает
Леон Лофает 12 napja
Я подумал что это архиологи нашли внеземное оружие пришельцев потерянное ими во время одного из посещений земли.
Fantastic Restoration
Fantastic Restoration 12 napja
Fantastic work 🤩🤩🤩🌟
Dirk Bachman
Dirk Bachman 13 napja
Parabéns este ser humano é espetacular ele tem um dom maravilhoso que presente de Deus cada coisa que ele faiz parece que não tem mais o que fazer é ele vai lá e da um jeito . Parabéns adoro seus videos sou de São Paulo Brasil abraços
Андрей Тула
Андрей Тула 13 napja
Блестяще!
German Fernandez
German Fernandez 13 napja
Another 1000 likes for you congratulations 😎
Jimenez83 Guribe
Jimenez83 Guribe 13 napja
Wapo k trabajo bien echo
Mifzal Hilmiy
Mifzal Hilmiy 13 napja
Orak konco kampung jrw tapi koncoku seng edan wong bangsri
Mifzal Hilmiy
Mifzal Hilmiy 13 napja
Woi goblok video apik koncoku edan neh
Resto Work
Resto Work 13 napja
A real machine gun :) MP40!!!
Christino Lian
Christino Lian 14 napja
amazing
Jaskaran Singh
Jaskaran Singh 14 napja
I wanna know how does it remember to put everything back ?
Joey Byrne
Joey Byrne 14 napja
How do you remove your nuts and bolts with out sheeting them?!?!?😱
PRASAD MAJHI
PRASAD MAJHI 14 napja
🌅 Jay Jagannath 💩 Sundar 🗽
MrZombie Brain
MrZombie Brain 14 napja
i luv u
iyus mika
iyus mika 14 napja
wht does it look like an smg
Riddhi Paul
Riddhi Paul 14 napja
this looks like the negev gun from csgo
Heman Gi
Heman Gi 15 napja
Oh my eyes
The Expert
The Expert 15 napja
Master craftsman...you my dude r no joke.
Tasty Channel
Tasty Channel 15 napja
Швейцарский Адвокат Егоров судя по наборам инструмента сделанного собственноручно!👍
Людмила Калмакова
Людмила Калмакова 15 napja
Если человек творческий и руки растут откуда надо, ещё к этому прибавить любовь и творчество, то такие люди могли бы многое сделать, только вперёд
طيب لضل
طيب لضل 15 napja
لالبيع اني اشتري
Romano Schwabel
Romano Schwabel 15 napja
what blue fluid you put on that the metal get dark/black?
Mhmod Mhmod
Mhmod Mhmod 15 napja
ايش هذا؟
pat walker
pat walker 15 napja
Why 14k thumbs down ??? Some people are plain restarted lol Great job 👍
Phim Hoạt cảnh
Phim Hoạt cảnh 15 napja
tuyệt vời!
Люба Кравцова
Люба Кравцова 15 napja
Я думаю это ручная дрель т.е сверло
Family - Entertainment
Family - Entertainment 15 napja
You can the plays ?
dakoy03
dakoy03 15 napja
now this is ASMR
Isidro Rodríguez
Isidro Rodríguez 16 napja
Art and technic of tools rehabilitation. That's great. Since Managua, Nicaragua.
Random Stuff
Random Stuff 16 napja
Is there something that lathe can't do?
carlos barrera
carlos barrera 16 napja
The fact that you can still see the screw's thread seems a bit odd to me.
حسن حسن
حسن حسن 16 napja
وة
احمد النعاني
احمد النعاني 16 napja
عمل جميل جداً ♥️
The Ropes of Renovation
The Ropes of Renovation 16 napja
Damned thing looks brand new!
The Ropes of Renovation
The Ropes of Renovation 16 napja
Just love watching the bluing!
The Ropes of Renovation
The Ropes of Renovation 16 napja
Poor tool holder and bit!!
Tyler Gabb
Tyler Gabb 16 napja
love watching you work
PNL Officiel
PNL Officiel 16 napja
مبدع مشاء الله...تحياتي لك من الجزائر..🇩🇿🇩🇿❤❤
им фамилия.
им фамилия. 16 napja
. Master gold hends Super,👍👍👍😳 ok.
Krish Singh
Krish Singh 16 napja
Nice
Megan Smith
Megan Smith 16 napja
*sharp edge exists* *my mechanics eye twitches*
YAG SIPCC
YAG SIPCC 16 napja
Reminds me of a cartoon grappling hook :P
الطريق الى الجنه
الطريق الى الجنه 17 napja
عاشت ايدك يا فنان
Pedro Araujo
Pedro Araujo 17 napja
Manual
Pedro Araujo
Pedro Araujo 17 napja
A veio
Pedro Araujo
Pedro Araujo 17 napja
Furar madeira
Andy ́s Multikopter- Luftaufnahmen
Andy ́s Multikopter- Luftaufnahmen 17 napja
Fantastic!!!!
Antique Hand Cranked Grinder - Restoration
23:47
my mechanics
Megtekintés 12 M
Old Soviet motorcycle full Restoration
34:59
Great idea
Megtekintés 39 M
Nincs idő a gólörömre | Bödőcs Tibor (részlet)
4:54
Comedy Central Magyarország
Megtekintés 48 E
Antique Rusty Cleaver - Restoration
13:26
my mechanics
Megtekintés 5 M
Antique Blowtorch Restoration
23:20
LADB Restoration
Megtekintés 1,8 M
Making a Bowie Knife
23:29
Leandro Goretta
Megtekintés 192 E
Antique Ox-Tongue Iron - Restoration
24:25
my mechanics
Megtekintés 9 M
Restoration 1851 Colt Navy
14:04
Pêcheur De Trésors
Megtekintés 3,1 M
Nincs idő a gólörömre | Bödőcs Tibor (részlet)
4:54
Comedy Central Magyarország
Megtekintés 48 E
RISITAS UTOLSÓ ELEMZÉSE - TrollFoci S4E06
3:33
TrollFoci YouTube Channel
Megtekintés 59 E
Mondd el Tatár Csillának Extra - Dr. Zimány Linda
10:30
Leander - Magamnak Hiányzom (Official Music Video)
3:16
A kamionos az Északi sarkkörön túl 2.rész
52:52